Jen Ken Glass Kiln

For Sale:  A very nice gently used Glass Kiln 

"Jen Ken Glass Fusing Kiln- Ontario, WI must sell"

Has a pre-programmed Smart Controller - super easy to use and set up.  Book included - has some writing in it.  If you ever wanted to do Glass fusing, PMC jewelry, etc. this little kiln will get you off to a great start.
"Glass Fusing and bead Annealer Kiln by Jen-Ken (Ontario, WI) Like new condition"

Do you do glass fusing, metal clay work or glass bead making? I have bought a bigger kiln and am now letting go of my smaller - little used Jen-Ken Glass Kiln for $350Firm - this is a steal at this price. Works great - have made glass jewelry such as necklaces, belt buckles, money clips, tiles coasters. Works on standard household current - See full description below.


email: Rundle@hughes.net or call 608-487-0054 for pictures or to set up appt to look at.


This like new AF3P 11/4.5 Glass Fusing & Bead Annealer Kiln by Jen-Ken is fully programmable, featuring the Orton AutoFire 3 Button Digital Controller that offers a VERY visible DIGITAL readout! The AF3P 11/4.5 Glass Fusing Bead Annealer Kiln can be used for any number of glass slumping, draping, fusing and annealing projects from beads and fabulous jewelry cabochons to sushi dishes and tiles! With this wonderful, dependable kiln, there is NO limit to your creativity!


ELECTRICAL: The Jen-Ken AF3P 11/4.5 Glass Fusing Bead Annealer uses standard 120 volt, 13 amp household current -- NO rewiring needed! It has a three-prong plug and 8 foot power cord.


INTERNAL DIMENSIONS: 11 inches wide, 4.5 inches deep WITHOUT shelf in place, and 3.5 inches deep WITH shelf in place.



EXTERNAL DIMENSIONS: 23.5 x 18 inches x 12 inches high.



WEIGHT: (set-up with kiln shelf in place) about 45 pounds.



CONTROLLER: Orton AF3P Pre-Programmed One Smart Controller that features multiple pre-programmed schedules of up to EIGHT ramp/soak segments each in length as follows:



FOUR pre-set LARGE Piece Glass Firing Schedules to include Slumping/Draping, Tack Fusing, Full Fusing and Fire Polishing PLUS FOUR additional “OPEN” schedules



FOUR pre-set SMALL Piece Glass Firing Schedules to include Slumping/Draping, Tack Fusing, Full Fusing and Fire Polishing PLUS FOUR additional “OPEN” schedules

**NOTE: Using any of the ceramic cone firing schedules you will ONLY be able to fire as high as the MAXIMUM firing temperature of this glass kiln, which would be 2000F.

FEATURES:


- Side Firing elements (You do NOT need or want heating elements in the lid of a kiln of this size!)


- Heavy duty handles for ease in portability.

- The lid of this top loading kiln opens completely and has been coated with a high temperature coating to prevent the fire brick from "shedding" on to your projects. Thanks to a specialized lid prop arm mechanism attached to the front of the kiln, the lid can be held open in two venting positions.


- This kiln is constructed of fire brick rated to 2400 degrees Fahrenheit with a maximum heating temperature of 2000 degrees Fahrenheit.